02
30 Year Experience
03
Best Quality

Stainless Steel 317/ 317L Tube Supplier, Manufacturer in Delhi, India

317L SS ERW TUBES, SS 317L TUBE , STAINLESS STEEL 317 TUBE, S31703 TUBES, STAINLESS STEEL 317L SEAMLESS TUBE, STAINLESS STEEL 317L WELDED TUBING, 1.4449, AISI 317 TUBES, STAINLESS STEEL 317 TUBING, 1.4438 TUBES, UNS S31700, ASTM A213 TP317 TUBES, 317 STAINLESS STEEL TUBING MANUFACTURER IN DELHI, INDIA.

Jain Steel Corporation is a New Delhi based Steel Company that has been leading the list of the top few Stainless Steel 317 / 317L Tube suppliers, distributors and exporters as well.

Stainless Steel 317 Tubes are fabricated from cold treatments for them to be used in Oil and Gas Industries The SS 317L Tubes that we provide are completely fine with being bended, flanged, fusion welding, and other forming processes. These SS 317 Tubes can be customized for our Clients according to their requirements.

Stainless Steel 317 Tubes have a lower carbon content in their chemical composition. Although SS 317L Tubes have excellent strength and a good amount of resistance against corrosion and these SS 317 Tubes can exhibit much stronger welds as the carbon content is low. for the Stainless Steel 317L Tubes have to be heated on low speeds and persistent feeds to lessen the work tendency of hardening it. For SS 317 Tubes, neither do we practice Oxyacetylene welding and nor would we recommend the same. Otherwise, welding can also be performed by the usual resistance and fusion techniques. SS 317L can be heat treated but only till 1149OC – 1260OC but it is better to not to exceed 927OC for safety reasons. For the optimizing of corrosion resistance, the process of post – annealing can be considered. The actions of shearing, stamping, heading and drawing are totally functional with SS 317L Tubes. However, post – work annealing is suggested to reduce and gradually eradicate the internal stress off the SS 317/317L Tubes. Above all, annealing has to be done with precision as annealing changes the entire form of the Stainless Steel and fixates it. Hence, the annealing must be carried out at 1010OC- 1121OC after which quick condensation is taking place.

The Stainless Steel 317/317L Tubes are utilized in Condensers in Fossils, Pulp and Paper Manufacturing Industry, Nuclear Fuelled Power Generation stations, Chemical and Petrochemical Equipment.

The Stainless Steel 317/317L Tubes’ hollow openings are closed with cap – like structures to avoid any damage to their edges and then the SS 317 Tubes are tightly wrapped and covered with a strong plastic sheet. A much protective packaging service can be provided by us, if required by the Clients.

Largest Inventory

On Time Deliveries

Customer Support

BUY STAINLESS STEEL 317 TUBES, SS 317 INDUSTRIAL TUBES, BUY SS 317L HEAT EXCHANGER TUBING, SS 317L CAPILLARY TUBE, SUS 317 SANITARY TUBE, 317 SS TUBES STOCKIST, HIGH PRESSURE STAINLESS STEEL 317 TUBE, STAINLESS STEEL 317L DECORATIVE TUBE, ASME SA269 TP317 WELDED TUBES STOCKHOLDER, SS 317 TUBING SUPPLIER IN INDIA.

STAINLESS STEEL TUBE MANUFACTURER

SIZE RANGE AND STANDARD SPECIFICATIONS FOR STAINLESS STEEL 317/ 317L TUBE

Specifications ASTM A213, A269, A249, A511, A554 / ASME SA213, SA269, SA249, SA511, SA554
Seamless Tube Size 1 / 2″ NB – 16″ NB
Welded Tube Size 1 / 2″ NB – 24″ NB
Outside Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Manufacturing Shapes Round, Rectangle, Square, Honed
Manufacturing Techniques Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded
Schedule Thickness Range SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
End Types Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
Inspection and Test Reports EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports

ASTM A213 TP317/ 317L STAINLESS STEEL TUBES EQUIVALENT GRADES

STANDARD UNS WNR. EN JIS
SS 317 S31700 1.4449 SUS 317
SS 317L S31703 1.4438 X2CrNiMo18-15-4 SUS 317L

Check Stainless Steel 317/ 317L Tube pressure rating and dimensions, SS 317 Tubes available in Round, Coiled and U shape in Schedule 10/40/60 thickness

317/ 317L Stainless Steel Tube Stock

SEAMLESS TUBE

Seamless Tube

1.4449, 1.4438 Seamless Tubes
SUS 317 Seamless Tubes Supplier
AISI 317L Seamless Tube
Stainless Steel 317 Seamless Tube
SS 317 Seamless Tube
317L Stainless Seamless Tubing
UNS S31700, S31703 Seamless Tube
317 SS SMLS Tubes
ASTM A213 TP317 Seamless Tubes
ASME SA 213 TP 317 Seamless Tubes
WELDED TUBE

Welded Tube

317 SS Welded Tubes
Stainless Steel 317 Welded Tube
SS 317 Welded Tube
SUS 317 Welded Tubes Supplier
AISI 317L Welded Tube
317L Stainless Welded Tube
UNS S31700, S31703 Welded Tubing
1.4449, 1.4438 Welded Tubes
ASTM A269 TP317 Welded Tubes
ASME SA 269 TP 317 Welded Tubes
ERW TUBE

ERW Tube

SUS 317 ERW Tubes Supplier
AISI 317L ERW Tube
Stainless Steel 317 ERW Tube
SS 317 ERW Tube
317L Stainless ERW Tube
UNS S31700, S31703 ERW Tubing
1.4449, 1.4438 ERW Tubes
317 SS Electric Resistance Welded Tubes
ASTM A269/A249 TP317 ERW Tubes
ASME SA 269 TP 317 ERW Tubes
INSTRUMENTATION TUBE

Instrumentation Tube

1.4449, 1.4438 Instrumentation Tubes
SUS 317 Instrumentation Tubes Supplier
AISI 317L Instrumentation Tube
317 SS Instrumentation Tubes
Stainless Steel 317 Instrumentation Tube
SS 317 Instrumentation Tube
317L Stainless Instrumentation Tube
UNS S31700, S31703 Instrumentation Tubing
ASTM A213 TP317 Instrumentation Tubes
ASME SA 269 TP 317 Instrumentation Tubes
HEAT EXCHAGER TUBE

Heat Exchanger Tube

SUS 317 Heat Exchanger Tubes Supplier
AISI 317L Heat Exchanger Tubing
317 SS Heat Exchanger Tubes
Stainless Steel 317 Heat Exchanger Tube
SS 317 Heat Exchanger Tube
317L Stainless Heat Exchanger Tubing
UNS S31700, S31703 Heat Exchanger Tube
1.4449, 1.4438 Heat Exchanger Tubes
ASTM A249 TP317 Heat Exchanger Tubes
ASME SA 213 TP 317L Heat Exchanger Tubes
SANITARY TUBE

Sanitary Tube

SUS 317 Sanitary Tubes Supplier
AISI 317L Sanitary Tubing
317 SS Sanitary Tubes
Stainless Steel 317 Sanitary Tube
SS 317 Sanitary Tube
317L Stainless Sanitary Tubing
UNS S31700, S31703 Sanitary Tube
1.4449, 1.4438 Sanitary Tubes
ASTM A213 TP317 Sanitary Tubes
ASME SA 269 TP 317 Sanitary Tubes

Contact us to get a quick quote for your requirement.

Manufacturer of 16 gauge 317 Stainless Steel Tubing, 317L Stainless Steel Schedule 80 Tubes, Stainless Steel Hollow Tubes 317-317L Grade Standard Specification.

CHEMICAL COMPOSITION OF STAINLESS STEEL 317/ 317L TUBES

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.845 min
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

MECHANICAL PROPERTIES OF STAINLESS STEEL 317/ 317L TUBES

DensityMelting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

FEATURES OF STAINLESS STEEL 317/ 317L TUBE

317/ 317L STAINLESS STEEL TUBE AVAILABLE INVENTORY

Stainless Steel 317 Round Tube Stainless Steel 317L Sanitary Tube
SS 317 Tubing Manufacturer SS 317 Seamless Tubing
317 Stainless Steel Tube 1.4449 SS Polished Tubes Stockist
ASTM A213 TP 317 Stainless Steel Tubes Stainless Steel 317L Custom Tubes
UNS S31700 Tubes Stainless Steel 317 Instrumentation Tubes
SS 317 Capillary Tubes Exporter Stainless Steel 317L Exhaust Tube
317 Stainless Steel Heat Exchanger Tubes 317 Stainless Steel Thin Wall Tubes
UNS S31703 Seamless Tubes Stainless Steel 317 Tubes Manufacturer in India
Stainless Steel 317 Cold Drawn Tubing Traders Custom Stainless Steel 317L Tube
Stainless Steel 317 High Pressure Tube ASTM A213 TP317 Stainless Steel Tube
317L Stainless Steel Cold Rolled Coiled Tube Stockists Stainless Steel 1.4449 Tubing
SUS 317 High Pressure Tube Stainless Steel 317 Colour Coated Tubing
Stainless Steel 1.4438 Customized Tubes AISI 317 Stainless Steel Welded Tube
UNS S31700 Tube Supplier in Mumbai ASME SA 269 TP 317L Stainless Steel Tube
Stainless Steel 317L Electropolish Tube Price 317 Stainless Steel Ornamental Tube
SS 317 Decorative Tubes Wholesaler ASTM A269 TP317 Instrumentation Tubes Exporter

APPLICATION OF STAINLESS STEEL 317/ 317L TUBES

WE EXPORT STAINLESS STEEL 317/ 317L TUBE ACROSS THE GLOBE !

MIDDLE EAST : Saudi Arabia, Iran, Ira, Qatar, Bahrain, Oman, Kuwait, Turkey, Yemen, Syria, Jordan, Cyprus

AFRICA : Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, the Republic Of Congo, Gabon

NORTH AMERICA : US, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark

EUROPE : Russia, Norway, Germany, France, Italy, UK, Spain, Ukraine, Netherlands, Belgium, Greece, Czech Republic, Portugal, Hungary Albania, Austria, Switzerland, Slovakia Finland, Ireland Croatia, Slovenia, Malta

ASIA : Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Myanmar, Taiwan, Cambodia

SOUTH AMERICA : Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay

WE SUPPLY STAINLESS STEEL 317/ 317L TUBE ALL OVER INDIA !

Andhra Pradesh : Visakhapatnam, Vijayawada

Bihar : Patna

Chhattisgarh : Raipur

Delhi : New Delhi

Gujarat : Ahmedabad, Surat, Vadodara, Rajkot

Haryana : Faridabad

Jammu and Kashmir : Srinagar

Jharkhand : Ranchi, Dhanbad

Karnataka : Bangalore

Madhya Pradesh : Indore, Bhopal, Gwalior, Jabalpur

Maharashtra : Mumbai, Pune, Nagpur, Thane, Nashik, Kalyan-Dombivli, Vasai-Virar, Aurangabad, Navi Mumbai

Punjab : Ludhiana, Amritsar

Rajasthan : Jaipur, Jodhpur, Kota

Tamil Nadu : Chennai, Coimbatore, Salem, Madurai

Telangana : Hyderabad

Uttar Pradesh : Lucknow, Kanpur, Ghaziabad, Agra, Meerut, Varanasi, Allahabad

West Bengal : Kolkata, Howrah

SEARCHES RELATED TO STAINLESS STEEL 317/ 317L TUBES

stainless steel 317l tubes manufacturer in mumbai, stainless steel 317 instrumentation tube supplier, 16 gauge 317l stainless steel tube, buy stainless steel tube 317 welded schedule 40, astm a269 tp317 tube, ss 317 welded tube near me, 317l stainless steel tube dimensions, 317 stainless steel tube sizes, stainless steel 317l welded tube supplier, astm a213 tp317l tube, astm a213 tp317l seamless tube, stainless steel 317l tube supplier in india, asme sa213 tp 317l stainless steel tube, stainless steel 317 instrumentation tube supplier, stainless steel tube grade 317l price list, cost of 317 stainless steel tube, ss 317l tube supplier in mumbai, stainless steel 317l tube price, 317l stainless steel tubing specifications pdf, 3 inch 317 stainless steel tube manufacturers, stainless steel 317 tube for sale, austenitic stainless steel 1.4449 seamless tubes, ss 317 erw tube supplier, stainless steel 317l tubing price list pdf, 317 stainless steel tube price list, 317l stainless steel tubing price list, 317l stainless steel tube specifications, stainless steel 317 seamless tube supplier, ss 317l tube chemical composition, astm a213 tp317l seamless tube, ss 317 stainless steel tube price per kg, stainless steel 317l erw tube supplier, stainless steel 317l tubing price list in india, ss 317l tube cost, stainless steel 317l tubing price list, ss 317 tubing price per meter, stainless steel s31703 seamless tubes supplier in india, stainless steel 317l tubing price per kg in india, austenitic stainless steel 317 tubes, 317 stainless steel tube in pune, price of stainless steel tube 317l, ss 1.4438 tube price list, top 100 stainless steel 317l tube dealers in pune, ss 317 tube weight chart, stainless steel 317l tubing manufacturers in india, ss 317 seamless tube supplier, 317l stainless steel tube specifications, aisi 317 seamless tube stockist, ss 317l tube weight chart.